Hobart Ecomax Plus Compact Glasswasher

This glasswasher is for bars and cafés that need a compact machine that can also handle tall glassware. The Ecomax Plus G415-D fits under most bar counters at 850mm high including its adjustable legs. It has a 315mm loading height, so tall glasses and jugs fit without tilting or squeezing them in.

It runs on single-button control. A colour-coded status light shows staff what the machine is doing, which makes training new starters quick and simple. You can choose a 60, 120 or 180-second cycle depending on how busy service is. A dedicated cutlery cycle means it can also wash cutlery, not just glasses. There's also a Hygiene programme that clears calcium build-up from the wash chamber when used with Hobart Hygiene-Tab INTENSIV.

Each rinse uses just 1.8 litres of water, and the deep-drawn, low-volume wash tank holds only 8 litres. That keeps your water and heating costs down. A built-in rinse pressure pump keeps wash results consistent even when your supply pressure drops or fluctuates, which is common in regional venues.

Ecomax Plus G415-D or Ecomax 404-C?

Both machines are the same compact height. The G415-D has a more powerful wash pump (160L/min compared with 120L/min) and a faster-heating 2.8kW booster. It also adds a cutlery cycle and an insulated cabinet. If you only wash glasses at a moderate pace, the 404-C will do the job. If your machine runs hard through service or you want to wash cutlery too, the G415-D is the better fit.

Key features

• Compact 850mm installation height, including 150mm adjustable legs
• 315mm loading height for tall glassware and jugs
• Simple single-button control with colour-coded machine status
• Three wash cycles (60, 120 and 180 seconds), plus a cutlery cycle and a Hygiene programme
• Low 1.8L rinse water use per cycle
• Deep-drawn, low-volume wash tank with integral strainer
• Rinse pressure pump for consistent results on low or fluctuating water pressure
• Double-walled, insulated cabinet and door to reduce noise and heat
• USB interface for downloading operational data
• Optional refill signal that monitors both external and integrated chemical containers
• Compatible with Hobart RO-S reverse osmosis water treatment
• Designed and manufactured in Germany
• WaterMark approved

What's in the box

The machine comes with one 396 x 396mm rack, a grid shelf that supports racks up to 400 x 400mm, fill and drain hoses, detergent and rinse aid pumps, and a 15A single-phase plug and lead.

Good to know before you buy

The machine needs a 15A power point, not a standard 10A outlet. If your water hardness is above 3°dH, Hobart recommends a water softener to protect the machine. If you connect it to cold water, the listed cycle times will run longer while the machine heats to temperature.

Specifications

Not sure which glasswasher suits your venue? Send us your measurements or come in and see us at the Wagga showroom, and we'll talk you through it.