Hobart Premax AUPT Double Hood Type Dish & Utensil Washer

The AUPT is the double-width version of the Premax AUP, built for high-volume kitchens that wash heavily soiled pots, trays, crates and utensils. It washes two 500 x 500mm racks side by side in each cycle, or larger containers. Its ASR automatic soil removal system flushes food soil into an external strainer as the machine runs. Hobart says this removes the need for manual pre-cleaning, and it keeps the wash water cleaner for longer.

Four wash pumps (two 1.2kW and two 0.7kW) drive the ROTOR-X wash arms. You can choose from POWER-PLUS for high-pressure washing, an Intensive program with steam to cut down on second runs, and an Eco program with steam rinse that uses just 1.4L of water per rack. The shortest cycle is 52 seconds.

It has Hobart’s full set of smart features: colour touchscreen, self-cleaning wash arms, SENSO-ACTIVE water management and the SmartConnect app. VAPOSTOP ER, drain water heat recovery and AUTO-HOOD LIFT are available as optional upgrades.

AUPT or AUP? The AUPT washes two racks per cycle instead of one, with double the tank and pump capacity. If you’re washing large volumes of pots and heavily soiled items, choose the AUPT. For a single dish line, the AUP will do the job.

Key features

• Double-width chamber for two 500 x 500mm racks or large containers
• ASR automatic soil removal into an external strainer
• POWER-PLUS high-pressure program for heavy soil
• Intensive program with steam and Eco program with steam rinse (1.4L per rack)
• 52-second shortest cycle, plus 70, 170 and 180-second and special cycles
• Four wash pumps (2 x 1.2kW, 2 x 0.7kW) with ROTOR-X wash arms
• 440mm loading height and 80L tank
• VISIOTRONIC-TOUCH colour touchscreen and SmartConnect app
• Self-cleaning wash arms and SENSO-ACTIVE water management
• Fully enclosed hood, CLIP-IN arms and EASY-CLEAN blue markings
• Optional VAPOSTOP ER, drain water heat recovery and AUTO-HOOD LIFT
• Made in Germany, WaterMark approved

Benches, sinks, sprays, water treatment units, crates and chemicals shown in images are not included.

Good to know before you buy

The standard model draws 22.7kW on a three-phase 3 x 35A supply, so have an electrician check your power before ordering. With the ASR unit fitted, the machine is 1469mm wide and needs a second drain connection. With the hood raised, it stands 1995mm tall. This machine needs very soft water, with hardness no higher than 1°dH, so most sites will need a Hobart Hydroline water treatment system. Keep the right-hand side accessible if you’re installing it in a corner.

Specifications

Planning a high-volume pot wash or dish area? Send us your layout or visit our Wagga showroom, and we’ll talk you through it.