Hobart Profi FXC Cutlery Premium Dishwasher

Polishing cutlery by hand is one of the most time-consuming jobs in a busy kitchen. The Profi FXC is built to remove it. Its CUTLERY PREMIUM system washes up to 80 pieces of cutlery per cycle and delivers them clean and shiny, ready to go straight back on the table without polishing. The machine selects the cutlery program automatically, so staff don't need to remember a setting. For the best results, Hobart recommends pairing it with an RO-S reverse osmosis unit.

When it isn't washing cutlery, the FXC works as a full undercounter dishwasher, with a 425mm loading height and a 500 x 500mm rack for plates and larger items. It has all the features of the Profi FX. The wash arms clean themselves at the end of every cycle, and SENSO-ACTIVE monitors wash water quality to keep rinse water to a minimum. The GENIUS-X² fine filter system reduces detergent use by up to 35%.

Staff run it from a colour touchscreen with single-button control, and the screen shows how much time is left on each cycle. The machine records its own operating data, which you can download by USB or follow through Hobart's SmartConnect app. The app shows machine status, usage, running costs, hygiene and service information.

Profi FXC or Profi FX?

The two machines share the same touchscreen, smart features and chamber size. The FXC has CUTLERY PREMIUM built in, plus a slightly more powerful wash pump. If your staff spend time polishing cutlery after every service, the FXC gives that time back. If cutlery is a small part of your washing, the standard Profi FX will do the job.

Key features

• CUTLERY PREMIUM system for up to 80 pieces of clean, shiny cutlery per cycle without polishing
• Cutlery program selected automatically by the machine
• 425mm loading height and 500 x 500mm rack for plates and large items
• 825mm installation height to fit under standard benches
• VISIOTRONIC-TOUCH colour touchscreen with single-button control and remaining cycle time display
• Self-cleaning wash arms that clean themselves with every cycle
• SENSO-ACTIVE resource management that keeps rinse water use to a minimum
• GENIUS-X² fine filter system with pre-wash, reducing detergent use by up to 35%
• SmartConnect app for machine status, usage, operating costs, hygiene and service information
• CLIP-IN wash and rinse arms that remove without tools
• Interlocked strainer, so the machine can't run without the tank strainer in place
• Automatic recording of operating data, with download via USB
• Hygiene programme for removing calcium build-up from the wash chamber
• Thermolabel 71°C default setting, which staff can switch to a higher temperature
• Optional 2IN1 double rack system for washing two racks per cycle
• Optional refill signal that monitors external and integrated chemical containers
• Compatible with Hobart RO-S reverse osmosis water treatment
• WaterMark approved

Good to know before you buy

The machine needs a 15A power point, not a standard 10A outlet. The CUTLERY PREMIUM cycle runs longer (270 seconds) and uses more rinse water (3.4L) than a standard wash, so plan cutlery loads around your busiest periods. If your water hardness is above 3°dH, Hobart recommends a water softener to protect the machine. If you connect it to cold water, the listed cycle times will run longer while the machine heats to temperature.

Specifications

Not sure if CUTLERY PREMIUM is worth it for your venue? Tell us how much cutlery you go through in a service, or come in and see us at the Wagga showroom, and we'll talk you through it.