Hobart Profi UX-ER Single Chamber Front Door Utensil Washer with Exhaust Heat Recovery

The UX-ER is the Profi UX with exhaust heat recovery built in. It captures steam from the machine and uses it to heat the incoming fresh water, which reduces the power needed by up to 3.1kW. That makes a real difference for kitchens and bakeries that run the machine through the day.

It washes pots and pans, cast iron cookware, baking tins, trays and up to four bakery racks per cycle in a 600 x 760mm rack with an 860mm loading height. A 2.9kW wash pump drives the ROTOR-X wash arms, and POWER wash adds high pressure for heavy soil. SENSO-ACTIVE keeps rinse water to a minimum, and the GENIUS-X² fine filter reduces detergent use by up to 35%.

Optional drain heat recovery can save up to a further 5.2kW, and VAPOSTOP is available to stop steam escaping when the door opens.

Key features

• Exhaust heat recovery built in (saves up to 3.1kW)
• 600 x 760mm rack and 860mm loading height (can be lowered to 650mm)
• Washes up to four bakery racks per cycle
• Front door loading
• 2.9kW wash pump (1,150L/min) with ROTOR-X wash arms
• POWER wash high-pressure program for heavy soil
• 120, 240 and 360-second cycles plus special cycles
• VISIOTRONIC single-button control with remaining time and text display
• SENSO-ACTIVE water management and GENIUS-X² fine filter
• CLIP-IN wash and rinse arms, interlocked strainer and EASY-CLEAN blue markings
• USB download of operating data and Hygiene programme
• Optional drain heat recovery (saves up to 5.2kW) and VAPOSTOP

Good to know before you buy

The standard model draws 15.6kW on a three-phase 3 x 25A supply, so have an electrician check your power before ordering. The exhaust heat recovery unit adds about 200mm to the top of the machine, so check your ceiling clearance. If your water hardness is above 3°dH, Hobart recommends a water softener.

Specifications

Running your pot wash all day? Send us your layout or visit our Wagga showroom, and we’ll talk you through the running cost savings.